Product Description

Product introduction
This product has superior performance and is designed and produced in strict accordance with the safety standards of household appliances, Safe and reliable, in line with the ideal energy value range of the human body, it is in home lifeMy good helper! Easy to use, start and use.
Usage method
1. Open the package, take out the product, install the bulb and lamp net cover, and adjust the lamp arm and lighting The required position and angle of the spotlight head to the body. 2. Turn on the power and preheat for about 1 minute. The irradiation time (the same part) is every adultAbout 30 minutes each time, and about 20 minutes each time for children.
3. During auxiliary use, the skin of the irradiated part shall be exposed at a distance of about 40cm, The skin temperature is about 40 degrees Celsius or varies from person to person, and you can feel comfortable.
Matters needing attention
1. Please read the instructions carefully before use.
2. During use, it is strictly prohibited to touch the heating plate and other parts in the illumination lamp cap and net cover, Children and people with intellectual disabilities must be supervised by adults to Avoid burns or injury Electric shock accident.
3. When irradiating the face, wear colored glasses or eye masks. Do not irradiate the eyes directly, Avoid eye injury.

4. If the product is not used for the first time or after being placed for a long time, the illumination lamp cap may be damaged White smoke will appear, which is caused by the moisture absorption of the heat preservation material of the irradiation lamp cap, which is positive The common phenomenon will disappear after preheating for a period of time. The product is damaged or damaged Do not disassemble the barrier by yourself. Please contact our company or dealer immediately. 5. Skin allergic reaction or other symptoms during irradiation due to personal physical differences In case of discomfort, stop using it immediately.
6. This product should not be used in strong electromagnetic environment and should avoid electromagnetic interference.
7. Never put water and liquid on the lighted bulb, otherwise the bulb will heat up Cold shrinkage, explosion.
8. Do not touch the bulb when turning on the lamp to avoid scalding. 9. When stopping use, turn off the bulb and disconnect the power supply.

Bulb installation procedure
1. Please remove the paper before powering on

2. Align the lamp cap with
3. Tighten the lamp cap the clamping position

4. Then install the stainless steel lampshade
 

Installation drawing of advanced lifting model (single headlamp)
1. Please put out all the accessories in the carton. Telescopic rod Nut
2. Inject water or sand into the hollow base Tighten the water plug cap.
This model has no screw holiest cab be locked directly
3. Screw out and insert the screw at the bottom of the telescopic rod Tighten the screws on the base.
4. Loosen the nut, pull out the telescopic rod and adjust it to the required position Tighten again to the required height.
5. Insert the product head into the telescopic rod Tighten the rear screws.
6. Install the complete product drawing Installation drawing of advanced lifting model (double head lamp)